This package provides means for opsview web to get netflow and sflow data for viewing the UI via the dashboard. It processes netflow and sflow data and pushes messages on the message queues to be stored in the database via
results-flow. The various dashlets send a command via the Orchestrator API to the relevant Collector where the netflow data is being stored to get Top 10 Host and Port, Transmitters and Receivers information. Results flow stores data which dashlets use to show sources summary and sources history.
Please make sure
opsview-messagequeue is installed configured and running before attempting to run the flowcollector.
On the Orchestrator server please make sure you install
opsview-results-flow package. This package reads the data sent from flow collector and adds into the database to be shown in the dashboards.
To install Flow Collector, you need to edit /opt/opsview/deploy/etc/user_vars.yml file and append the following:
Then, run the following command as root:
cd /opt/opsview/deploy ./bin/opsview-deploy lib/playbooks/setup-opsview.yml
No configuration is required if the flow-collector is installed on the same machine as the orchestrator and messagequeue. In any other setup the collector needs to know where the opsview-messagequeue is installed. Flow collector will then determine the correct flow-results queue, flow-request and flow-response queue. There are two possible scenarios here;
The user edits the component yaml file path
/opt/opsview/flowcollector/etc/flowcollector.yaml(on the collector) and edits
/opt/opsview/resultsflow/etc/resultsflow.yaml(on the orchestrator) to point to the correct messagequeue as below.
The user edits the loadbalancer messagequeue.cfg to point to the correct message queue server. Examples of which are further below.
--- flowcollector: messagequeue: host: <provide your messagequeue host ip address> port: 35672
--- resultsflow: messagequeue: host: <provide your messagequeue host ip address> port: 35672
#The forwarding ports need to be the same listen messagequeue bind <LOCALHOST or IP ADDRESS OF THE COLLECTOR SERVER>:35672 mode tcp timeout client 3h timeout server 3h option clitcpka server messagequeue <IP ADDRESS OF THE MESSAGEQUEUE HOST>:35672 check inter 5s listen messagequeue-management bind 0.0.0.0:45672 mode tcp timeout client 3h timeout server 3h option clitcpka server messagequeue 127.0.0.1:15672 check inter 5s
Watchdog service configuration files are now managed by the package, doing a remove would leave the watchdog service file behind with a .save extension. Purging the package will remove it. Any modifications to the files will be saved at upgrade and removal of the package.
Watchdog service files are now managed by the package. Any modifications will be saved at upgrade and remove processes with the .rpmnew and .rpmsave extensions correspondingly.
As root, start, stop and restart the service using:
/opt/opsview/watchdog/bin/opsview-monit <start|stop|restart> opsview-flowcollector /opt/opsview/watchdog/bin/opsview-monit <start|stop|restart> opsview-resultsflow
Updated over 2 years ago