AutoMonitor Scanner

Description

The Opsview AutoMonitor Scanner is used for discovering devices set up on your network for more easily adding monitoring of devices into Opsview

Dependencies

It uses the framework provided by the Scheduler

Installation

This component is deployed alongside the Scheduler component when installing Opsview Monitor.

Configuration

The user configuration options should be set in /opt/opsview/scheduler/etc/scheduler.yaml. Default values are shown in /opt/opsview/scheduler/etc/scheduler.defaults.yaml, but changes should not be made here since the file will get overwritten on package update.

The following options can be set:

• workers: The number of devices that may be inspected concurrently in a single scan.
• concurrent_scans: The number of scans that may be run concurrently by the scheduler.

Management

Configuration and Service Administration

The AutoMonitor Scanner operates under the control of the Scheduler.