Hey! These docs are for version 6.3, which is no longer officially supported. Click here for the latest version, 6.7!

Tracking changes

Monitoring NetAudit changes

Once NetAudit is configured, Opsview Monitor starts backing up your network configuration and the information becomes available in the Monitoring > NetAudit page.

Note: The data on this page is then updated every 4 hours.

To view the details of a NetAudit-enabled Host, go to the Monitoring > NetAudit page. The following screen is displayed:

1365

Click on 'rancid' to display the list of Hosts that have NetAudit enabled (and are thus having their configuration files backed up):

1363

Click on the hostname or IP address to view the configuration file:

1496

This will display the latest 'whole' configuration file for the host.
Keep in mind that the collection job is run every 4 hours, therefore you may not see the up-to-date information immediately.

To view historical versions, use the arrows in the toolbar above the display area. You can also compare with the previous configuration file to see what has changed, by clicking the 'Compare with Previous' button. This will enable a screen with both versions in parallel, highlighting the changes:

1075

Note: As Opsview Monitor is only used to help you see changes, as an audit functionality, if you locate a change that is not adequate, you will need to manually correct the configuration file for the device.