This guide is for users of RHEL7/CentOS7 or Ubuntu 16.04/Debian 8 without direct access to the internet and is geared towards a base install.
Please read through the Simple Automated Installation guide for prerequisites and general information before embarking on this guide.
You will need to either:
- set up a network proxy to enable access to the public repositories, or
- take a copy of our public Opsview Monitor repository and transfer it to a server on your target network, to create a repository mirror
Note: The repository is not browsable; a mirroring process is the best way to download all of the packages
The base URLs for mirroring our repositories are:
# RHEL/CentOS https://downloads.opsview.com/opsview-commercial/6.3/yum/<OS>/<VERSION>/x86_64 # e.g. https://downloads.opsview.com/opsview-commercial/6.3/yum/rhel/7Server/x86_64 # Ubuntu/Debian https://downloads.opsview.com/opsview-commercial/6.3/apt
Please note, additional OS packages may be installed during this process, so you may also need to provide access to mirrored or local OS repositories, too.
This is a simple example of setting up a local repository
# Setup Repo curl -sLo- https://deploy.opsview.com/6.3 | sudo bash -s -- -O repo
Create local area to store Opsview packages
reposync -l -p --repoid=https://downloads.opsview.com/opsview-commercial/6.3/yum/centos/7Server/x86_64 --download_path=/var/tmp/local_opsview_repo
Inform the Package manager of the Opsview files
createrepo -v /var/tmp/local_opsview_repo
Add a repo source file
vim /etc/yum.repos.d/localrepo.repo [localrepo] name=Opsview Local Repository baseurl=file:///var/tmp/local_opsview_repo gpgcheck=0 enabled=1
Refresh the package manager cache
yum clean all yum makecache fast
You will also need to take a copy of the installation script (and verify its checksum) before transferring this to the target server:
curl -sLo- https://deploy.opsview.com/6 > install_opsview sha256sum install_opsview
Ensure the returned string matches the following:
Note: All of these steps should be run as the
- Using the Opsview Monitor deploy script downloaded earlier, install the initial package set. Specify a suitable
<password>to use with the Opsview Monitor
bash ./install_opsview -p <password> -O fire,boot
This will make use of both the mirrored OS repository and the mirrored Opsview repository you have previously set up and configured.
- Amend the file
/opt/opsview/deploy/etc/opsview_deploy.ymland ensure all hostnames detected have the domain specified on them, for example, assuming the hostname is
orchestrator_hosts: opsmonitor.example.com: ip: 192.168.0.10
example.com to match your own domain
- Amend the file
/opt/opsview/deploy/etc/user_vars.ymland add in the following appropriate line for your OS to specify the URL to your local Opsview Monitor package repository mirror:
# CentOS/RHEL opsview_repository_str_yum: 'http://my.repo/$basearch/' # Debian/Ubuntu opsview_repository_str_apt: 'deb http://my.repo/ trusty main' # Pre-flight check for the repository check_uri_opsview_repository: 'http://my.repo/'
If you intend to use optional modules, you can enable them by adding lines as follows (note: these will still need an appropriate license to enable them) in the same file:
opsview_module_netaudit: True opsview_module_netflow: True opsview_module_servicedesk_connector: True opsview_module_reporting: True opsview_module_snmp_traps: True
- Continue the installation using the following command:
bash ./install_opsview -p <password> -O inst
Note: If a more advanced setup is required then take a look the Advanced Automated Installation documentation first.
- Run the post-install configuration step:
Once successfully installed, perform a manual activation by following the steps on Managing your Subscription
After activation is successful, run:
This will check your newly activated license and ensure all appropriate modules are installed and configured for your use.
During the installation, a single administrative user will have been created. The credentials for this user are:
username: admin password: <password supplied during installation>
After the system is activated, carry out a reload by navigating to 'Configuration => [System] => Apply Changes' and pressing the
Apply Changes button.
Updated about 2 years ago